2004-up Rubbermount XL/Sportster Weld-on Rigid Frame Hardtail. Convert your Sporty to a rigid Chopper/Bobber practically overnight!!! Brought to you by Bitter End - Old School Choppers - One-Stop Shopping for Hardcore Chopper Builders. Fits stock XL (Sportster) frames for 2004-up (Rubber-mounts) and will handle up to a 250mm rear tire with chain. You will just need a longer axle than stock, axle adjuster collar kit, and additional axle spacers (Available directly from us).
However, we can also build in-house to your specs - any stretch, width, etc. PLEASE NOTE: This item has 1 axle slots. The new measurement from center of swingarm pivot shaft to axle center when axle if all the way forward will be approximately 22.5. Does not require a frame jig to mount as long as necessary steps to check sqareness and level are taken prior to welding. This is all explained in our YouTube video which explains step-by-step how to install this hardtail.Visit our YouTube channel: BEOSChops. PLEASE NOTE: This listing is for the hardtail section ONLY. Other parts such as the front frame section, wheel, tire, axle, etc. ARE NOT INCLUDED IN THIS ITEM AT THIS PRICE - THIS ITEM IS FOR this HARDTAIL ONLY.
WE ARE NOW MAKING HARDTAILS FOR 2004-UP SPORTYS IN WIDE TIRE (UPTO 240/250) AND DROP SEAT VERSIONS! PLEASE consider the following BEFORE purchasing and/or installing a hardtail on a 2004-up XL/Sportster: - We do not currently offer a bolt-on kit to make up for the engine stability lost from the removal of the swingarm, whose pivot also serves as the rear motor mount. Most common solution for this is to go back to the older style (pre-2004) forward controls that mount the master cylinder on the pulley cover plate. However, this is NOT a straight bolt-up solution. The hardtails that we sell have a rear brake caliper bracket that works best with 2000 - 2006 calipers/caliper brackets.
So, you may want to budget for this if your bike is 2007-up. Springer installation will require removal of the whole fork neck lock system from the frame for clearance and turn radius.
This involves cutting the frame and fabrication and weld work to fill the resulting hole. The item "04-up Harley XL/Sportster Weld-on Hardtail, 4 Stretch, Curved Seat, 250 Width" is in sale since Thursday, February 14, 2019. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Body & Frame\Frames". The seller is "bitterendoldschoolchoppers" and is located in Des Moines, Iowa. This item can be shipped worldwide.