5,000 Different Spoke Wheels with the Different Diameters of Rims (16", 18", 19", 21" & 23") the Different Widths of Rims (1.40", 1.50", 1.60", 1.85", 2.15", 2.50", 3.00", 3.25", 3.50", and wider) and the Different Years of Hubs (Chromed, Gloss Black Powder coated, Flat Black Powder Coated) the Different Spokes Finishes (Chromed, Stainless Steel & Polished Stainless Steel) and Round Spokes & Twisted Spokes. 16" x 3.50" CHROMED REAR Wheel. Polished Stainless Steel 6ga / 8ga SPOKES.
This is a "Double Row Sealed Bearing" 3/4" Hub which has "Better Quality Bearings than the Earlier and 2008-Later Wheels with the Narrow wheel bearings.. NEW PHOTO'S of the "All CHROME HUB" to come Next Week!!!With the: Much Better "Double Row Wheel Bearings", these "Double Row" wheel bearings will usually go between 100K-200K miles before needing to be replaced. The earlier wheel bearings had to be taken out of the wheel every 10,000 miles to repack with grease and new wheel seals and the 2008-Later wheel bearings were "Very Lucky" to get 25k-30k miles before going out. I've even heard of "Several Customers" of mine who got less than 10,000 miles from their stock wheel bearings before they went out.... We Chose a Chrome Spoke Brand that we have used for Many, Many Years and we have had Very Good History with them and We Also Chose a Chrome Rim Company where we can "Constantly" True the Rims to. 020 or Less (Half of HD Spec's) and Usually get them Trued to. 010 just a little thicker that a Human Hair!! 020 runout (average) and the Hubs will be Centered to within. 020" and all of the Spokes will be "TORQUED EVENLY with a Spoke Torque Wrench! This will keep the Spokes from BREAKING. This is a TRUE Story: I had a customer come in our Shop one day and he bought a "VERY CHEAP" Imported HD Replica Wheel (Completly Assembled, Laced & Trued) on the Internet and wanted us to Mount and Balance a Tire on it for him so I asked him: "Would you like us to "FIX it First or just go ahead and Mount & Balance the Tire? He said: "What do you mean"? I told him to come around to our Service Dept. That the "Cheap Priced Import Wheel" he just bought Brand New would Not be Built Correctly and he Didn't want to bet me. So we put it in our Truing Stand and it had Over. 090" Runout "Side to Side(double HD Spec's and FIVE Times what we would use), the Hub was aprox. 125" off center (Where it was supposed to be SIX Times what we would do) and the Spokes were tightened "Unevenly any where from 20 - 50 in. "Unevenly Torqued Spokes" are the Biggest Cause for Spokes to Break and Come Loose!! You could have a "Perfectly Trued Wheel" & "Perfectly Centered Wheel" but have Some Spokes Torqued at 10 and others Torqued at 20 and another side of the wheel could be Torqued at 50-60 and that is why Many Wheels "Constantly Break Spokes"!! We have Built 1,000's of Stock and Custom Wheels!
Right here in the "USA"! Do you Need your Wheel Repaired? We have 100's of Rims and 100's of Spoke Sets in Stock!
If you have any Questions? And you want a Quick/Fast Answer? (The afternoon is the best time, I'm in the machine shop in the mornings).The item "2000-2007 HD HARLEY REAR 80 SPOKE 16 X 3.50 CHROMED WHEEL TWISTED DIAMOND SPOKE" is in sale since Saturday, January 21, 2017. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Wheels, Tires & Tubes\Wheels & Rims". The seller is "azharleybob" and is located in Phoenix, Arizona. This item can be shipped worldwide.